Low Density Ammonium Nitrate (AN) Plant - 400 TPD

Low Density Ammonium Nitrate (AN) Plant - 400 TPD
STOCK# 416
Capacity 400 TPD

Used 400 TPD Low Density Ammonium Nitrate Plant built in 1998. The sale package includes concentration, prilling, and drying sections. The Prilling Scrubber is a closed tank of grade 304L stainless steel, of approximately 3.5m (11'6") internal diameter and overall height of approximately 8.5m (27'10"). Internally the vessel contains a mist eliminator, spray headers, packing off a support grid and a chimney collector tray the metallurgy of which is grade 304L stainless steel. The Coating Drum is approximately 2m (6') diameter and 4m (13') long, of carbon steel construction, with a drum wall thickness of approximately 0.025m (1") with internal flights welded to the inner skin of the drum. There are flights staggered throughout the length of the drum of overall length either 1.2m (4') or 1.5m (5') each. It is supported on 3No. rotating bull gearing trunnions one of which is a drive motor and the others being tyre supports. The Vacuum Evaporator Condenser is approximately 0.9m (3') diameter and overall length of 5.3m (17'4") in height with the bottom of the condenser approximately 30.5m (8'4") above the ground floor slab level. It is of grade 304L stainless steel construction and internally contains approximately 400No. tubes of grade 304L stainless steel. Neutralizer, ammonia evaporator, condensate flash tank, 83% ammonium nitrate solution tank are not available. But the data sheets and drawings of all the equipment are included in the sale.

Major Equipment
Ammonium nitrate mix tank
Prill scrubber
Prill scruber exchanger
LDAN additive make-up and holding tanks
Rotating drums
Coating drum
Coating agent day tank
Prill tower
Final screener
Drum scrubber exchanger
Vacuum evaporator condenser
Vacuum evaporator
Pre-dryer drum
Dryer drum
Cooler drum
Drum scrubber

Low Density Ammonium Nitrate

Resource Links
Similar Plants
Other Chemical Plants Customers Viewed