Waukesha 5 hp Centrifugal Pump, M/N C218, S/N 2102, with Aprox. 3" x 1-1/2" Clamp Type Inlet/Outlet with Reliance 1745 RPM Motor (LOCATED IN CHAMPAIGN, IL)

Waukesha Cherry-Burrell 7.5 hp Positive Displacement Pump, M/N 060, S/N 253845, with Baldor 1760 RPM Motor, with Aprox. 3" Clamp Type Inlet/Outlet, 230/460 Volts, 3 Phase (LOCATED IN CHAMPAIGN, IL)

Puriti 7.5 Centrifugal Pump, M/N C-216, S/N 229353 98, with Reliance 3510 RPM Motor, 230/460 Volts, 3 Phase, with Aprox. 3" x 1-1/2" Clamp Type Inlet/Outlets, 230/460 Volts, 3 Phase (LOCATED IN CHAMPAIGN, IL)

Centrifugal Pumps, 1-Puriti 5 hp Centrifugal Pump, M/N C218, S/N 21287097, with Reliance 1745 RPM Motor, 230/460 Volts, 3 Phase, with 1-Puriti 1.5 hp Centrifugal Pump, 1721 RPM Motor, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Mueller Aprox. 500 Gal. Vertical S/S Single Wall Tank, Tank Internal Dims.: Aprox. 67" Tall x 47-1/2" Dia., with S/S Hinge Lid, Mounted on S/S Legs with Load Cells, with S/S Platform, Overall Dims. of Platform: Aprox. 60" L x 40" W x 89" H (LOCATED IN CHAMPAIGN, IL)

Waukesha 7.5 hp Positive Displacement Pump, M/N 130, S/N 145 321 P1-0, with Baldor 1770 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 3" Clamp Type Inlet/Outlet, Mounted on S/S Frame

SPX 1.5 hp Positive Displacement Pump, M/N 030 U1, S/N 1000003000409, with Baldor 1755 RPM Motor, 208-230/460 Volts, 3 Phase, Mounted on S/S Frame

S/S Hopper/Feeder, with Aprox. (7) Clamp Type S/S Air Valves, with Additional S/S Hopper (NOTE: Located Above (2) Cheese Cookers) (LOCATED IN CHAMPAIGN, IL)

Emulsion Skid, Includes 20 hp Emulsifer Pump, with Baldor 1765 RPM Motor, 208-230/460 Volts, 3 Phase, with S/S Flash Tank, with APV S/S Plate Heat Exchanger, M/N HXCS-6, S/N 2593-9435, with Aprox. (18) S/S Plates, with Selector Vacuum Pump with Circulating Valving, with Skid & Platform (LOCATED IN CHAMPAIGN, IL)

Emulsion Skid, Includes 20 hp Emulsifer Pump, with Baldor 1765 RPM Motor, 208-230/460 Volts, 3 Phase, with S/S Infeed Flash Tank, Mounted on S/S Skid & Platform, with S/S Side Mounted Control Panel (NOTE: Does NOT Includes Digitial Read Outs Associated with Other Lots) (LOCATED IN CHAMPAIGN, IL)

Emulsion Skid, Includes Axiflow Tech 20 hp Emulsifer Pump, M/N STSC90H-60, S/N 22413-001, with Baldor 1760 RPM Motor, 208-230/460 Volts, 3 Phase, with S/S Infeed Flash Tank, Includes Selector Vacuum Pump, with APV Plate Heat Exchanger, with Aprox. (41) S/S Plates & Frames, Mounted on S/S Frame Platform, with S/S Control Panel with Chart Recorder (LOCATED IN CHAMPAIGN, IL)

APV Crepaco Inc. Plate Heat Exchanger, M/N R56, S/N 24747, with Aprox. (50) Plates, with S/S Platform, with S/S Grating & Handrails, with ThinkTop S/S Air Valve with Associated Steam Valve (LOCATED IN CHAMPAIGN, IL)

S/S Hopper/Feeder, with Aprox. (7) Clamp Type S/S Air Valves, with Additional S/S Hopper, with (4) Flow Meter Digital Read Outs, with S/S Balance Tank & S/S Chute, Includes S/S Duct Work Back to 1st Horizontal (LOCATED IN CHAMPAIGN, IL)

Kraft Foods Rotating Auger Feeder, S/N 2, Job No.: 3324-24 with 5 hp Drive/1765 RPM, with S/S Hopper, Internal Dims.: Aprox. 68-1/2" L x 48" W x 77" Deep, with Aprox. 118" L S/S Auger with Discharge Chute (LOCATED IN CHAMPAIGN, IL)

A & D Aprox. 600 Gal. S/S Surge Tank, Internal Dims. of Cone: Aprox. 64" Dia. x 45" Tall, Upper Tank Dims.: Aprox. 24" Tall x 64" Dia., with Baldor 3 hp Motor, 1750 RPM, 208-230/460 Volts, 3 Phase, Mounted on S/S Legs & Load Cells (LOCATED IN CHAMPAIGN, IL)

Used 50 Gal. S/S Single Wall Tank, with Cone Bottoms, Mounted on S/S Platforms on Load Cells, Internal Tank Dims.: Aprox. 26" Tall x 23-1/2" Dia., with S/S Hinge Lids (Scale Tank #1/Cookers 3-4 & Tank 1)

Aprox. 50 Gal. S/S Single Wall Tanks, with Cone Bottoms, Mounted on S/S Platforms on Load Cells, Internal Tank Dims.: Aprox. 27-1/2" Tall x 22-1/2" Dia., with S/S Hinge Lids

Fairbanks S/S Platform Scale, with Aprox. 28" L x 23" W, with Wall Mounted Digital Read Out (LOCATED IN CHAMPAIGN, IL)

AAF Roto-Clone Blower Unit, with 5 hp Reliance Motor, 1745 RPM Motor, 230/460 Volts, 3 Phase, with S/S Ceiling Mounted Platform (LOCATED IN CHAMPAIGN, IL)

Used 20 hp Emulsifier, with Baldor 1765 RPM Motor, with S/S Vertical Flash Tank, 208-230/460 Volts, 3 Phase, with Skid & Platform

APV Plate Press Heat Exchanger, M/N R-56, S/N 15085, with Aprox. (50) S/S Plates, with S/S Platform (LOCATED IN CHAMPAIGN, IL)

Busch Vacuum Pump, with Baldor 1755 RPM Motor, 208-230/460 Volts, 3 Phase, with Associated Steam Valving & (1) Air Valve, with (2) Cuttler-Hammer Safety Switches (LOCATED IN CHAMPAIGN, IL)

2015 SPX 15 hp Positive Displacement Pump, M/N 220 U1, S/N 3034802 R2-9, with Aprox. 4" Thread Type Inlet/Outlet, with Baldor 1765 RPM Motor (LOCATED IN CHAMPAIGN, IL)

Used 75 gallon Stainless Steel tank. 24"Dia x 36"H. 7" Cone bottom. (4) Leg mounted.

2019 SPX 5 hp Positive Displacement Pump, M/N 130 U1 R2, S/N 1000003762586, with Reliance 1750 RPM, 208-230/460 Volts, 3 Phase, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

2012 Waukesha Cherry-Burrell 7.5 hp Positive Displacement Pump, M/N 130 U1, S/N 2739115R2, with Reliance 1765 RPM Motor, 208-230/460 Volts, 3 Phase (LOCATED IN CHAMPAIGN, IL)

WCB Positive Displacement Pump Head, M/N 060, S/N 043168 06 (NOTE: Missing Head, Rotors, & Motor)(LOCATED IN CHAMPAIGN, IL)

S/S COP Tank, with Ampco 10 hp Centrifugal Pump, 3500 RPM Motor, Internal Dims.: Aprox. 134-1/2" L x 16" W x 11" H, with Spray Jet, Mounted on S/S Portable Frame (CP COP #13)

Taco Shell & Tube Heat Exchanger, S/N T54677, MAWP-S: 150 PSI @ 375 F, MAWP-T: 150 PSI @ 375 F, with 1.5 hp Centrifugal Pump (LOCATED IN CHAMPAIGN, IL)

HAP S/S Vertical Salt Hopper, with Cone Bottom, Bottom Mounted S/S Actuated Butterfly Valve, with Fairbanks Digitial Read Out, Hopper Mounted on Load Cells & S/S Frame (LOCATED IN CHAMPAIGN, IL)

S/S COP Tank, Internal Dims.; Aprox. 41" L x 20" W x 14" Deep

Feldmeier 1,000 Gal. S/S High Shear Mix Tank, S/N E-1020-00, with Dome Top/Cone Bottom, with S/S Man Ladder, with Vertical S/S High Shear Agitator, with Top Mounted 40 hp Agitation Motor, 1800 RPM, Internal Tank Dims.: Aprox. 70" Tall x 64" Dia., with Dual CIP Spray Balls, with Top Infeed Ports, with S/S Covers, with Frame Mounted on Load Cells with Fairbanks Digitial Read Out

WCB 15 hp Positive Displacement Pump, M/N 130, S/N 276659, with Reliance 1755 RPM Motor, 230/460 Volts, 3 Phase, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Waukesha Positive Displacement Pump, M/N 130, S/N 276659 00, with S/S Head, with Reliance 3510 RPM Motor, 208-230/460 Volts, 3 Phase (LOCATED IN CHAMPAIGN, IL)

2015 SPX 10 hp Positive Displacement Pump, M/N 130U1, S/N 3028336 R2-3, with Reliance 1755 RPM Motor, 208-230/460 Volts, 3 Phase (NOTE: Missing Pump Head & Impellers)

WCB 10 hp Positive Displacement Pump, M/N 130, S/N 356315 04, with Baldor 1770 RPM Motor, 208-230/460 Volts, 3 Phase

Tri-Clover 5 hp Centrifugal Pump, M/N C216MD18T-S, S/N R1518, with Reliance 3515 RPM Motor, 230/460 Volts, 3 Phase, with Aprox. 2" x 1" Clamp Type Inlet/Outlet, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

5 hp Centrifugal Pump, with Reliance 3480 RPM Motor, 230/460 Volts, 3 Phase, with Aprox. 2-1/2" x 1-1/2" Clamp Type Inlet/Outlet, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

Tri-Clover 5 hp Centrifugal Pump, with Reliance 1745 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 2" x 2-1/2" Clamp Type S/S Head (LOCATED IN CHAMPAIGN, IL)

Rietz Grinder/Chopper/Dual S/S Auger Feeder, M/N M-16-K6964, S/N DI-6904444-B, with S/S Infeed Hopper with Motor (LOCATED IN CHAMPAIGN, IL)

BULK BID: INCLUDES LOTS 357 A & 357 B (LOCATED IN CHAMPAIGN, IL)

Rietz Disintegrator, M/N RI-24-K354, S/N RI6904444-A, with Louis Allis 300 hp Motor, 1190 RPM, 460 Volts, 3 Phase, with S/S Disintegrator Chamber, with Bottom Mounted S/S Dicharge Chute (LOCATED IN CHAMPAIGN, IL)

Rietz Grinder/Chopper/Dual S/S Auger Feeder, M/N DF-16-K6964, S/N DF6904444-A, with S/S Infeed Hopper with Motor (LOCATED IN CHAMPAIGN, IL)

Straight Section of Discharge Conveyor, Overall Length: Aprox. 22' L, with Aprox. 34" W Belt, with Plastic Side Wall, On S/S Track, with S/S Platform & Drive (LOCATED IN CHAMPAIGN, IL)

Straight Section of Infeed Conveyor, with S/S Infeed Chute with S/S Side Walls, Overall Length Aprox. 14' L, with Aprox. 30" W Belt, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Straight Section of Roller Conveyor, Aprox. 8' L, with 25-1/2" W Roll, Aprox. 29" H (Roll to Ground) (LOCATED IN CHAMPAIGN, IL)

Nu-Con Blower, M/N 100X4RTSV, S/N 701373, with Clamp Type Inlet/Outlet

Turmoil Closed Loop Chillers, M/N OC-300-RL, S/N 10133-05, 460 Volts, 3 Phase, with Nu-Con S/S Filter, M/N C-100, S/N 0505-B9349 (LOCATED IN CHAMPAIGN, IL)

2005 Readco S/S Extruder, Machine 5 Inch C.P., S/N 108530, with Some S/S Spare Parts, Includes (2) S/S Augers, (2) S/S Heads with Portable Cart, with Reliance 30 hp Motor, 230/460 Volts, 3 Phase, with S/S Platform, with S/S Handrails & S/S Grating (NOTE: Missing Some Parts--See Photographs)

Incline Section of Portable Conveyor, with Aprox. 36" W Belt, with 2 hp Drive, Overall Length Aprox.: 144" L, Mounted on S/S Portable Frame.