Used Scott Plow Mixer, Model 4810, 48" x 120", 75 cubic foot of mixing capacity. Endplates 1/2" plate, 3/8" mixer tub. Features 316SS welded construction on all product contact points; Interior of mixer finished with 120 grit sanitary finish; (3) 10 hp choppers to disperse lumps; choppers mounted through the tub wall on the upward rotation side. Agitator: 7" solid 316SS main shaft with welded 2" thick support post. Doors: Hinged doors allow for entry and service. Doors are protected by limit switches to prevent opening during operation. Product Inlet: Inlet supplied for filling with pneumatic conveyor. Shaft Seals: Sanitary hand disassemble air purge packing gland seals with (3) rings of teflon packing and (1) UHMW lantern ring. Discharge: Air actuated 14" flush mount plug gate at the center of the mixer. 36" legs provided for discharge clearance. Legs made of tubular carbon steel painted with white food grade epoxy paint. Bearings: Set outboard with heavy duty 5-15/16" nickel plated pillow block bearings on drive end of mixer and 5-15/16" nickel plated pillow block bearings on idle end of mixer. Drive Assembly: Final mixer speed 62 rpm; 125 HP belt drive, 1.7 service factor provided on drive, drive is complete with 304SS OSHA guard; 125 HP reducer, Falk gearhead type 1.4 service factor on reducer; 125 HP explosion proof motor, 3 ph/460V with carbon steel motor mount. Also includes Vac-U-Max Model 10507T Receiver 8" x 16".