Boiler Feed water pump- Ultra Dyne Model FTD-12M, code 81004-412, production # 117/218929-1, with 30 HP, 60hz, 3510rpm motor, asset #: 509045

Viking gearbox without pump: Part # 3-551-052-417 CP, 2hp, 60hz, 1715rpm motor

Shaker conveyer: Smico vibrator conveyor, sn: 20660, sales # 88524, 240vac, 3 ph, asset# 504789

Pneumatic system (best for rail car unloading): Kongskilde bag filtering system, HBF asset # 610809, model: 0110, sn: 700579

Bagging system: Vac-U-Max bagging system for Bulk bags.

Unit Heater: Dunham-Bush unit heater, steam/forced air, cat#: H-1350-C, sn: 761002734, 115vac fan

Case sealer: Elliot case sealer, model: 8800, sn: 90-10-22, 230 vac, with Nordson glue system, Model: 2302, sn: AA90E07268

Case Erector: Bemis case erector, model: 1516D103, sn: 9151610390D, 460 vac, 3ph, with Nordson glue system, model: 2302

Used 500 gallon working capacity Readco double arm mixer, carbon steel mixer, sigma blades are carbon steel with satellite coating, jacketed trough rated 200 PSI @ 450 degrees F, hydraulic tilting bowl, on unitized base with 300 HP 460 volt motor drive, Serial #105841. Approximate dimensions of bowl are 63.5" L x 73.5" W x 50"H. Approximate weight: 55,000 lobs plus 15,000 lbs for drive assembly. With Falk gear reducer, model 2111OY2-B, 1750 RPM. M.O.: 7-866504-01-1, input rpm: 1750, Output rpm: 184.7, ratio: 9.476:1, service rating HP: 300 Service factor: 1.78, oil capacity: 11 gallons Motor: GE-300hp, 460volt, 3phase, 60Hz, 1760rpm, 330 amps, frame: 449TS. Sn: JP445049 Twin Disc Fluid Coupling: model: 21HEM, spec no: 99008, sn: 269413. Max safe speed: 1900rpm. Falk gear reducer: Model: 2110Y2-B

Advance model 3800 riding floor scrubber available. It is serial number 1025396 unit, purchased in 1995.

Used Cornell Versator, model D-16, stainless steel. 16" diameterdisc, rated 1200-4000 rpm. 1-20 gallons per minute. Flat door. 2"bottom outlet. Driven by a 7.5 hp motor. No condenser or vacuum pump.

Used Stainless steel approx 150 Sq Ft, Shell & Tube (U-Tube) Heat Exchanger. 304-SS Shell rated 150 PSI @ 300 deg F; 316-SS Tubes rated 150 PSI @ 300 deg F; 304-SS Heads. Shell: 12.75" Dia x 10' Long; (38) tubes - 3/4" OD. Nozzles: Shell - (2) 2", Tubes - (2) 2", (2) 3/4" . Built 1981 by Rubicon, Model 12BU8-120H, S/N: 1279-1, NB# 156.

Used 155 sq. ft. vertical Graphilor Polyblock heat exchanger. MFD by Carbone, model PBC8D-9PU-1-4, Serial # 10945, built 1997. ASME code stamped for 161 psi @ 350 deg. F, -20 deg. F , shell side; 100 psi & FV @ 350 deg. F, -20 deg F on tube side. Single pass axial, 4 pass radial. Shell 10.75" OD x 128" long. Openings: Process side (2) 6", Service side (2) 1-1/2", (2) 3/4" drain. NB# 1169.

Used Stainless steel approx 150 Sq Ft, Shell & Tube (U-Tube) Heat Exchanger. 304-SS Shell rated 150 PSI @ 300 deg F; 316-SS Tubes rated 150 PSI @ 300 deg F; 304-SS Heads. Shell: 12.75" Dia x 10' Long; (38) tubes - 3/4" OD. Nozzles: Shell - (2) 2", Tubes - (2) 2", (2) 3/4" . Built 1981 by Rubicon, Model 12BU8-120H, S/N: 1279-1, NB# 155.

UNUSED 125 sq. ft. vertical impervite Graphite heat exchanger. MFD by Gaspar, Inc, Serial # 599002, built 1998. ASME code stamped for 100 psi @ 340 deg. F, -20 deg. F , shell side; 100 psi @ 340 deg. F, -20 deg F on tube side. Shell 12.75" OD x approx 65.75" long. Openings: Process side (2) 5", Service side (2) 3", (2) 3/4" drain. NB# 1312.

Used 155 square feet vertical Graphilor Polyblock heat exchanger. MFD by Carbone, model PBC8D-9PU-1-4, Serial # 10945, built 1997. ASME code stamped for 161 psi @ 350 deg. F, -20 deg. F , shell side; 100 psi & FV @ 350 deg. F, -20 deg F on tube side. Single pass axial, 4 pass radial. Shell 10.75" OD x 128" long. Openings: Process side (2) 6", Service side (2) 1-1/2", (2) 3/4" drain. NB# 1169.