Used 300 Cu Ft Stainless Steel Ribbon Blender. Approx 270 Cu Ft working volume. Trough dimensions: 144" L x 60" W x 66" Deep. 100 hp Motor, 1785 RPM, 460 Volts, 3 Phase. Bottom Discharge, Overall 186" L x 67" W x 107" H. Stainless Steel Leg mounted. Serial # 70-197. Missing Chain and motor.

Used 300 Cu Ft Stainless Steel Ribbon Blender. Approx 270 Cu Ft working volume. Trough dimensions: 144" L x 60" W x 66" Deep. 100 hp Motor, 1785 RPM, 460 Volts, 3 Phase. Bottom Discharge, Overall 186" L x 67" W x 107" H. Stainless Steel Leg mounted.

Used 300 Cu Ft Stainless Steel Ribbon Blender. Approx 270 Cu Ft working volume. Trough dimensions: 144" L x 60" W x 66" Deep. 100 hp Motor, 1785 RPM, 460 Volts, 3 Phase. Bottom Discharge, Overall 186" L x 67" W x 107" H. Stainless Steel Leg mounted. Serial #70-196. Bad motor.

Used 300 Cu Ft Stainless Steel Ribbon Blender. Trough dimensions: 144" L x 60" W x 66" Deep. 100 hp Motor, 1785 RPM, 460 Volts, 3 Phase. Bottom Discharge, Overall 186" L x 67" W x 107" H. Stainless Steel Leg mounted. Serial # 64750-62.

Used 300 Cu Ft Stainless Steel Ribbon Blender. Trough dimensions: 144" L x 60" W x 66" Deep. 100 hp Motor, 1785 RPM, 460 Volts, 3 Phase. Bottom Discharge, Overall 186" L x 67" W x 107" H. Stainless Steel Leg mounted. Serial # 3894-91.

Used 300 Cu Ft Stainless Steel Ribbon Blender. Approx 270 Cu Ft working volume. Trough dimensions: 144" L x 60" W x 66" Deep. 100 hp Motor, 1785 RPM, 460 Volts, 3 Phase. Bottom Discharge, Overall 186" L x 67" W x 107" H. Stainless Steel Leg mounted.

Used 300 Cu Ft Stainless Steel Ribbon Blender. Approx 270 Cu Ft working volume. Trough dimensions: 144" L x 60" W x 66" Deep. 100 hp Motor, 1785 RPM, 460 Volts, 3 Phase. Bottom Discharge, Overall 186" L x 67" W x 107" H. Stainless Steel Leg mounted. Missing Chain and guard.

(4) 2013 Eaton S/S Filters, M/N S21524ABGVBX1500, with S/S Skid with Ball Valves & Associated Piping (LOCATED IN CHAMPAIGN, IL)

HAP S/S Vertical Salt Hopper, with Cone Bottom, Bottom Mounted S/S Actuated Butterfly Valve, with Fairbanks Digitial Read Out, Hopper Mounted on Load Cells & S/S Frame (LOCATED IN CHAMPAIGN, IL)

(2) Wilden Plastic Diaphragm Pumps, with Associated Pipes & Valving, with 5-Gal. Barrel on S/S Cart (LOCATED IN CHAMPAIGN, IL)

Busch Dual Vacuum Pump System, with Vertical Air Receiving Tank, M/N DVED-2-RC0063, S/N D1322M, with Allen-Bradley SLC 150 Programmable Controller, with (2) 3 hp Vacuum Pumps, Type RC0068-A005-1001, Mounted on Frame (LOCATED IN CHAMPAIGN, IL)

Thrush Inc. Shell & Tube Heat Exchanger, Tag #: HWRU-02530, S/N HTP, with Recirculation Pump, Heat Exchanger Dims.: Aprox. 41" L x 12" Dia. Tube, with Associated Valving

Sani-Matic S/S COP Tank, M/N UWJ-175, with Tri-Clover 7-1/2 hp Centrifugal Pump, Internal Dims.: Aprox. 122-1/2" L x 20-1/2" W x 17" H, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Breddo 300 Gal. S/S Likwifier, M/N LOR, S/N 315752-1 0540065, with Reliance 60 hp Offset Motor, 1780 RPM, Mounted on Load Cells

Ampco 7.5 hp Centrifugal Pump, M/N C216MD211-5, S/N CC32900-3-1, 230/460 Volts, 3 Phase, with S/S Air Valve (LOCATED IN CHAMPAIGN, IL)

2010 GPE 600 Gal. S/S Processor, M/N 600U79, Nat'L Board Number: 12038, MAWP 100 PSI @ 338 F, MDMT -20 F @ 100 PSI, with SEW Top Mounted Agitation Motor, with S/S Vertical Agitation, with Load Cells & Fairbanks Digital Read Out, Overall Tank Height: Aprox. 156" Tall, with S/S Platform, Overall Platform Dims.: Aprox. 90-1/2" L x 90-1/2" W x 93" H (Platform to Ground), with Handrails & Ladders, with Safety Gate (LOCATED IN CHAMPAIGN, IL)

2004 Feldmeier 1,000 Gal. S/S Processor, S/N E-160-04, Jacket MAWP 100 PSI @ 175 F, Min. Design Metal Temp. -20 F @ 100 PSI, Mounted on S/S Legs & Load Cells, with Fairbanks Digitial Read Out, with Cone Bottom, Tank Internal Dims.: Aprox. 48" Tall x 80" Dia., with Dual CIP Spray Balls, with Top Mounted Agitatoin Motor with S/S Agitation (LOCATED IN CHAMPAIGN, IL)

Used 2000 Gal. S/S Single Wall Tank. manufactured by DCI. S/N 98-D-574240-P, with Dome Top/Cone Bottom, Mounted on S/S Legs & Load Cells, with Dual S/S CIP Spray Balls, with Reliance 1755 RPM Top Mounted Agitatoin Motor (LOCATED IN CHAMPAIGN, IL)

Used 250 Gal. S/S Single Wall Vertical Tank, Internal Dims.: Aprox. 36" Tall x 48" Dia., with Cylinder Assist Opening Lid, Mounted on S/S Legs & Load Cells.

DCI 1,000 Gal. S/S Single Wall Vertical Tank, S/N JS961-B, Dome Top/Cone Bottom, with S/S Legs Mounted on Load Cells, with Fairbanks Digitial Read Out, with Baldor 3 hp Top Mounted Agitation Motor, 208-230/460 Volts, 3 Phase, with Dual CIP spray Balls (LOCATED IN CHAMPAIGN, IL)

DCI 1,000 Gal. S/S Single Wall Vertical Tank, S/N JS961-A, Dome Top/Cone Bottom, with S/S Legs Mounted on Load Cells, with Fairbanks Digitial Read Out, with Baldor 3 hp Top Mounted Agitation Motor, 208-230/460 Volts, 3 Phase, with Dual CIP spray Balls (LOCATED IN CHAMPAIGN, IL)

St. Regis Aprox. 1,000 Gal. Single Wall Tank, S/N 11407, Dome Top/Cone Bottom, Mounted on S/S Legs & Load Cells, with Fairbanks Digitial Read Out, with Top Mounted Agitation Motor, Internal Tank Dims.: Aprox. 57" Dia. x 70" Tall

DCI 2,000 Gal. S/S Single Wall Tank, S/N 90-D-40569-B, with Dual CIP Spray Ball, Dome Top/Cone Bottom, Mounted on S/S Frame & Load Cells, with Fairbanks Digitial Read Out, with Top Mounted Agitation Motor, with S/S Man Ladder

DCI 2,000 Gal. S/S Single Wall Tank, S/N 92-D-44768-B, with Dual CIP Spray Ball, Dome Top/Cone Bottom, Mounted on S/S Frame & Load Cells, with Fairbanks Digitial Read Out, with 7.5 HP Top Mounted Agitation Motor, with S/S Man Ladder

DCI 2,000 Gal. S/S Single Wall Tank, S/N 92-D-44569-A, with Dual CIP Spray Ball, Dome Top/Cone Bottom, Mounted on S/S Frame & Load Cells, with Fairbanks Digitial Read Out, with Top Mounted Agitation Motor, with S/S Man Ladder (LOCATED IN CHAMPAIGN, IL)

Used 2,000 Gal. S/S Single Wall Vertical Tank, Tank Internal Dims.: Aprox. 83" Tall x 88" Dia. with Dual 4-Prop Vertical S/S Agitation, Dome Top/Slope Bottom, with Top Mounted Agitation Motor (LOCATED IN CHAMPAIGN, IL)

Used 7500 Gallon 316L Stainless Steel Jacketed Mix Tank. Manufactured by DCI. 22 gallon Jacket MAWP 150/FV PSI @100F. Top mounted 7.5HP motor 460/60/3 with Anchor-sidesweep agitation. Dome top, sloped bottom. 18" Top Manway. (6) Leg mounted. 125"OD x 229"OAH. Serial #JS01249-B. Built 2000. Weight 8058 lbs. Past use Cheese plant.

Used 7500 Gallon 316L Stainless Steel Jacketed Mix Tank. Manufactured by DCI. 22 gallon Jacket MAWP 150/FV PSI @100F. Top mounted 7.5HP motor 460/60/3 with Anchor-sidesweep agitation. Dome top, sloped bottom. 18" Top Manway. (6) Leg mounted. 125"OD x 229"OAH. Serial #JS01249-A. Built 2000. Weight 8058 lbs. Past use Cheese plant.

S/S Liquid Recon Hopper, with S/S Single Wall Design, Mounted on S/S Frame & Load Cells, Includes S/S Control Panel with Air Outlet Box & Additional S/S Panel, with Fairbanks Read Out & I/A Series Flow Meter Read Out, with Associated Piping & Valveing, Includes All S/S Platform, with S/S Grating & Handrails (LOCATED IN CHAMPAIGN, IL)

2-Sections of ACS Roller Conveyor, (1) Aprox. 153" L with Drive & (1) Aprox. 184" L (LOCATED IN CHAMPAIGN, IL)

Used 20 hp Emulsion Skid, with S/S Vessel Head, Aprox. 28-1/2" Dia., with Buusch Vacuum Pump, with Additional Drive, Mounted on S/S Frame (NOTE: Addition Drive Missing Head--See Photographs).

2001 American Process Systems S/S Filter Hopper, M/N D212-5690, S/N 5690, with S/S Lid, with Incline Auger Feed with Baldor Drive, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

2001 American Process Systems S/S Filter Hopper, M/N D212/5689, with S/S Lid, with Incline Auger Feed with Baldor Drive, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

Waukesha 10 hp Positive Displacement Pump, M/N 130, S/N 357039 04, with Baldor 1770 RPM Motor, 230/460 Volts, 3 Phase, with Aprox. 3-1/2" Clampy Type Inlet/Outlet, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

2016 SPX 25 hp Positive Displacement Pump, M/N 220 U1 R2-0, S/N 1000003076626, with Reliance 25 hp Motor, 1770 RPM, 230/460 Volts, 3 Phase, with Aprox. 4" Clamp Type Inlet/Outlet, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

2016 SPX 30 hp Positive Displacement Pump, M/N 220 UL, S/N 100003142920, with Aprox. 4" Clamp Type Inlet/Outlet, with Reliance 1765 RPM Motor, 208-230/460 Volts, 3 Phase, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

2013 SPX 2 hp Positive Displacement Pump, M/N 130 U1, S/N 100000285, with Baldor 1750 RPM Motor, with Aprox. 3" Clamp Type Inlet/Outlet, On S/S Skid (LOCATED IN CHAMPAIGN, IL)

WCB 10 hp Positive Displacement Pump, M/N 130, S/N 41176506, with Baldor 1770 RPM Motor, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

Used 10 hp Centrifugal Pump, with Reliance 3505 RPM Motor, with Aprox. 2" x 1-1/2" Inlet/Outlet, Clamp Type, Mounted on S/S Skid.

7.5 hp Centrifugal Pump, with Reliance 3520 RPM Motor, with Aprox. 2" x 1-1/2" Inlet/Outlet, Clamp Type, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

2015 SPX 7.5 hp Positive Displacement Pump, M/N 130U1, S/N 3012116 R2-6, 230/460 Volts, 3 Phase, with Aprox. 3" Clamp Type Inlet/Outlet, with Baldor 1770 RPM Motor, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

2012 SPX 5 hp Positive Displacement Pump, M/N 130 U1, S/N 2749035 R1-6, Reliance 1745 RPM Motor, 230/460 Volts, 3 Phase, with Aprox. 3" Clamp Type Inlet/Outlet, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

2011 WCB 10 Positive Displacement Pump, M/N 130, S/N 2605416R2, with Baldor 1770 RPM Motor, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

2011 WCB 20 hp Positive Displacement Pump, M/N 130 U1, S/N 1000002616265, with Reliance 1760 RPM, 230/460 Volts, 3 Phase, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

WCB 10 hp Positive Displacement Pump, M/N 130, S/N 426744 07, with Reliance 1745 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 3" Clamp Type Inlet/Outlet, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

2016 SPX 3 hp Positive Displacement Pump, M/N 030 U1, S/N 1000003163548, with Reliance 1755 RPM, 230/460 Volts, 3 Phase, with Aprox. 2" Clamp Type Inlet/Outlet (LOCATED IN CHAMPAIGN, IL)

2015 SPX 7.5 hp Positive Displacement Pump, M/N 30U1, S/N 3012119 R1-3, with Baldor 1770 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 3" Clamp Type Inlet/Outlet, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

2011 WCB 10 hp Positive Displacement Pump, M/N 060 U1, S/N 43080-CR-6, with Reliance 1755 RPM Motor, 208-230/460 Volts, 3 Phase, Mounted on S/S Skid (LOCATED IN CHAMPAIGN, IL)

2015 SPX 10 hp Positive Displacement Pump, M/N 220U1, S/N 30465998 R2-3, with Reliance 1755 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 4" Thread Type Inlet/Outlet, Mounted on S/S Skid

Puriti 10 hp Centrifugal Pump, M/N C216, S/N 18582196, with Baldor 3490 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 2-1/2" x 1-1/2" Clamp Type Inlet/Outlet, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)