Wood Pellet Plant Liquidation

Phoenix Equipment is pleased to offer major process machinery from a Used 600,000 TPY wood pellet plant, built in 2017, in Pine Bluff, Arkansas. The offering consists of (4) individual stand-alone lines (20 tons per hour), each consisting of drying island and hammer mill loops. Available equipment from each line starts with 65 MMBTU Gas Burner; Combustion Chamber; Convectec Heater; Soot Blowers; Pre-Dryer (air heated); Hot Baghouse; Tube Dryer (oil heated); Heater Oil Loop; Expansion tank; Pump Skid; Dryer Waste Screws; Chip Drag Conveyor; Dry Distribution Screw; Spreader Transition and Rock Box; (2) Dry Hammer Mills; Exhauster Fans, Duct and Cyclones; Long Term Conditioner Screws

Used- Schutte-Buffalo 15 Series Wood Grinder, Model 15300, Carbon Steel. Rotor approximate 44” diameter x 72” wide with approximate 3” wide x ¾” thick swinging hammers, tip speed 20,700. Top feed, bottom discharge, bottom screen approximate 5040 square inch area, clam shell housing. Driven by a 500hp, 3/60/460 volt, 1785 rpm motor. Mounted on an I beam frame. Serial# 17-12027B.

Used- Schutte-Buffalo 15 Series Wood Grinder, Model 15300, Carbon Steel. Rotor approximate 44” diameter x 72” wide with approximate 3” wide x ¾” thick swinging hammers, tip speed 20,700. Top feed, bottom discharge, bottom screen approximate 5040 square inch area, clam shell housing. Driven by a 500hp, 3/60/460 volt, 1785 rpm motor. Mounted on an I beam frame. Serial# 17-12027A.

Used- Schutte-Buffalo 15 Series Wood Grinder, Model 15300, Carbon Steel. Rotor approximate 44” diameter x 72” wide with approximate 3” wide x ¾” thick swinging hammers, tip speed 20,700. Top feed, bottom discharge, bottom screen approximate 5040 square inch area, clam shell housing. Driven by a 500hp, 3/60/460 volt, 1791 rpm motor. Mounted on an I beam frame. Serial# 1709002D.

Used- Schutte-Buffalo 15 Series Wood Grinder, Model 15300, Carbon Steel. Rotor approximate 44” diameter x 72” wide with approximate 3” wide x ¾” thick swinging hammers, tip speed 20,700. Top feed, bottom discharge, bottom screen approximate 5040 square inch area, clam shell housing. Driven by a 500hp, 3/60/460 volt, 1791 rpm motor. Mounted on an I beam frame. Serial# 1709002C.

Used- Schutte-Buffalo 15 Series Wood Grinder, Model 15300, Carbon Steel. Rotor approximate 44” diameter x 72” wide with approximate 3” wide x ¾” thick swinging hammers, tip speed 20,700. Top feed, bottom discharge, bottom screen approximate 5040 square inch area, clam shell housing. Driven by a 500hp, 3/60/460 volt, 1791 rpm motor. Mounted on an I beam frame. Serial# 1709002B.

Used- Schutte-Buffalo 15 Series Wood Grinder, Model 15300, Carbon Steel. Rotor approximate 44” diameter x 72” wide with approximate 3” wide x ¾” thick swinging hammers, tip speed 20,700. Top feed, bottom discharge, bottom screen approximate 5040 square inch area, clam shell housing. Driven by a 500hp, 3/60/460 volt, 1791 rpm motor. Mounted on an I beam frame. Serial# 1709002A.

Astec Screener, Model 1624V, Carbon Steel. Approximate 72" wide x 24' long, 2 separation. Serial# 154205.

Astec Screener, Model 1624V, Carbon Steel. Approximate 72" wide x 24' long, 2 separation. Serial# 154203.

Astec Rotary Tube Type Indirect Dryer, Model WPD-10829, Carbon Steel. Last used with wood chips removed 5% - 6% moisture from feed material. End feed with hopper and screw feeder, end discharge with hood and a stainless steel auger discharge. Dryer driven by a chain & sprocket with a 60hp motor with a reducer, ratio 43.78 to 1. Includes a control panel with a Siemens Milltronics BW500/L controller. Serial# 15-206-288662-4-1.

Astec Rotary Hot Oil Tube Type Indirect Dryer, Model TD-1060, 13'3" diameter x 68'7" long, Carbon Steel. Last used drying wood from 45% to 10% moisture content. End feed with hopper and screw feeder, end discharge with hood and hot oil inlet & outlet manifold. Dryer driven by a chain & sprocket with a 75hp motor with a reducer, ratio 64.42 to 1. Includes a control panel with a Siemens PLC controller, thrust idler hydraulic pump panel. Serial# 15-206-288662-8-1.

Continental Enclosed Tube Inclined Screw Conveyor, Carbon Steel. Approximate 24" diameter x 28' long with motor and reducer.

Astec Chip Drag Conveyor, Model BTD Drag. 304 Stainless steel housing, plastic paddles, carbon steel chain. Approximate 18" wide x 48' overall length. Driven by a 7.5hp motor with reducer. Serial# 15-206-288662-19-1.

Hammermill Loop System Consisting Of: (2) Schutte-Buffalo-Astec Hammermills, Model AHM-20 Carbon Steel. Each mill has approximate (2) 48" diameter x 24" wide rotors. Top feed with hopper, bottom discharge. Each mill driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Each mounted on a frame. Includes (2) Twin City blowers, Type RBR-SW, size 926, each driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. (1) Top mounted dry distribution dual screw feeder. Designed to split flow of material to each hammermill, or reverse a screw to send all material to one side and (2) exhauster cyclones.

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate (2) 48" diameter x 24" wide rotors. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor.

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor.

Astec Wood Fuel Conditioner, Carbon Steel. Approximate 12' diameter x 12' straight side. Side access door, (3) off center bottom outlets with (1) discharge screw conveyor. Top mounted agitator with a 50hp motor.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 16" diameter x 24' long with motor and reducer.

Smoot Blower System Consisting Of: (1) Roots positive displacement blower, model 56U-RAI, serial# 1510923284, driven by a 20hp motor. Includes silencer. Mounted on a frame, Smoot serial# 64938-1.

Hot Oil Pump Skid Consisting Of: (3) Blackmer System One Centrifugal Pumps, Model FRM, 316 Stainless Steel. Size 8 X 10-13, approximate 4200 gallons per minute at 110' head at 275 psi at 100 degrees F. Each driven by a 100hp motor, serial# 1108454FM, 1080014FM, 1094376FM. (3) Strainers with miscellaneous piping and valves. (1) Xylem 2 pass carbon steel shell & tube heat exchanger. Shell rated 125 psi at 1600 degrees F., tubes 150 psi at 1375 degrees F. Serial# 284050-03-2, National Board# 315500, built 2019. (1) Skid with a pump, heat exchanger and tank. (1) Expansion tank and a panel.

Astec Gas Burner, Model PB-65U-B-G-0-SF-FD-BB. Rated 65 MMBTU/HR. Job# 006744-015-206. Includes (1) combustion chamber, (1) Lapco ash collector, and (1) Twin City blower, size 270, type RTF-SW. Driven by a 75hp motor, serial# 19-746509-16-1.

Heatec Convectec All Convection Heater, Hot Oil Heater, Job# HI16-062-551. Includes a control panel, expansion tank and (1) Twin City blower, size 917, type RBO-SW. Driven by a 15hp motor, serial# 15-546656-3-1.

Used Stainless Steel Cyclone, Approximate 7' diameter x 40' tall. Includes a bottom rotary valve and (1) Twin City blower, size 929, type RBR-SW. Driven by a 200hp motor, serial# 19-746510-2-1.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 16" diameter x 24' long with motor and reducer.

Astec Hot Baghouse, Model BH-68-12-PP, Carbon Steel. Top bolt on bag section housing, coned bottom discharge section with discharge conveyor. Includes a 250hp blower.

Astec Hot Baghouse, Model BH-68-16-PP-S, Carbon Steel. Top bolt on bag section housing, coned bottom discharge section with discharge conveyor. Serial# 18-003-331776-1-1. Includes a 250hp blower.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 19' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 21'6" long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 13' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 16' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 16' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 21'6" long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Rotary Tube Type Indirect Dryer, Model WPD-10829, Carbon Steel. Last used with wood chips removed 5% - 6% moisture from feed material. End feed with hopper and screw feeder, end discharge with hood and a stainless steel auger discharge. Dryer driven by a chain & sprocket with a 60hp motor with a reducer, ratio 43.78 to 1. Includes a control panel with a Siemens Milltronics BW500/L controller. Serial# 16-086-299260-4-1.

Astec Rotary Hot Oil Tube Type Indirect Dryer, Model TD-1060, Carbon Steel. Last used drying wood from 45% to 10% moisture content. End feed with hopper and screw feeder, end discharge with hood and hot oil inlet & outlet manifold. Dryer driven by a chain & sprocket with a75hp motor with a reducer, ratio 64.42 to 1. Includes a control panel with a Siemens PLC controller, thrust idler hydraulic pump panel. Serial# 16-086-299260-8-1.

Continental Enclosed Tube Inclined Screw Conveyor, Carbon Steel. Approximate 24" diameter x 28' long with motor and reducer.

Astec Chip Drag Conveyor, Model BTD Drag. 304 Stainless steel housing, plastic paddles, carbon steel chain. Approximate 18" wide x 48' overall length. Driven by a 7.5hp motor with reducer. Serial# 16-087-299328-16-1.

Hammermill Loop System Consisting Of: (2) Schutte-Buffalo-Astec Hammermills, Model AHM-20 Carbon Steel. Each mill has approximate (2) 48" diameter x 24" wide rotors. Top feed with hopper, bottom discharge. Each mill driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Each mounted on a frame. Includes (2) Twin City blowers, Type RBR-SW, size 926, each driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. (1) Top mounted dry distribution dual screw feeder. Designed to split flow of material to each hammermill, or reverse a screw to send all material to one side and (2) exhauster cyclones.

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16-086-299260-22-1. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16-086-299260-22-1.

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16-086-299260-22-1. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16-086-299260-22-1.

Astec Wood Fuel Conditioner, Carbon Steel. Approximate 12' diameter x 12' straight side. Side access door, (3) off center bottom outlets with (1) discharge screw conveyor. Top mounted agitator with a 50hp motor.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 16" diameter x 24' long with motor and reducer.

Smoot Blower System Consisting Of: (1) Roots positive displacement blower, model 56U-RAI, serial# 1605933603, driven by a 20hp motor. Includes silencer. Mounted on a frame, Smoot serial# 72582-001.

Hot Oil Pump Skid Consisting Of: (3) Blackmer System One Centrifugal Pumps, Model FRM, 316 Stainless Steel. Size 8 X 10-13, approximate 4200 gallons per minute at 110' head at 275 psi at 100 degrees F. Each driven by a 100hp motor, serial# 1080015FM, 1108452FM, 1080141FM. (3) Strainers with miscellaneous piping and valves. (1) Xylem 2 pass carbon steel shell & tube heat exchanger. Shell rated 125 psi at 1600 degrees F., tubes 150 psi at 1375 degrees F. Serial# 284050-01-2, National Board# 314910, built 2018. (1) Skid with a pump, heat exchanger and tank. (1) Expansion tank and a panel.

Astec Gas Burner, Model PB-65U-B-G-0-SF-FD-BB. Rated 65 MMBTU/HR. Includes (1) combustion chamber, (1) Lapco ash collector, and (1) Twin City blower, size 270, type RTF-SW. Driven by a 75hp motor, serial# 19-746509-16-1.

Heatec Convectec Hot Oil Heater, Job# HI16-063-551. Includes a control panel, expansion tank and (1) Twin City blower, driven by an approximate 15hp motor.

Stainless Steel Cyclone, Approximate 7' diameter x 40' tall. Includes a bottom rotary valve and (1) Twin City blower, driven by a 200hp motor.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 16" diameter x 24' long with motor and reducer.

Astec Hot Baghouse, Model BH-68-12-PP, Carbon Steel. Top bolt on bag section housing, coned bottom discharge section with discharge conveyor. Includes a 250hp blower.

Astec Hot Baghouse, Model BH-68-16-PP-S, Carbon Steel. Top bolt on bag section housing, coned bottom discharge section with discharge conveyor. Serial# 16-086-299260-56-1. Includes a 250hp blower.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 19' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 21'6" long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 13' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 16' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 16' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 21'6" long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Rotary Tube Type Indirect Dryer, Model WPD-10829, Carbon Steel. Last used with wood chips removed 5% - 6% moisture from feed material. End feed with hopper and screw feeder, end discharge with hood and a stainless steel auger discharge. Dryer driven by a chain & sprocket with a 60hp motor with a reducer, ratio 43.78 to 1. Includes a control panel with a Siemens Milltronics BW500/L controller. Serial# 16-087-299328-4-1.

Astec Rotary Hot Oil Tube Type Indirect Dryer, Model TD-1060, Carbon Steel. Last used drying wood from 45% to 10% moisture content. End feed with hopper and screw feeder, end discharge with hood and hot oil inlet & outlet manifold. Dryer driven by a chain & sprocket with a75hp motor with a reducer, ratio 64.42 to 1. Includes a control panel with a Siemens PLC controller, thrust idler hydraulic pump panel. Serial# 16-087-299328-8-1.

Continental Enclosed Tube Inclined Screw Conveyor, Carbon Steel. Approximate 24" diameter x 28' long with motor and reducer.

Astec Chip Drag Conveyor, Model BTD Drag. 304 Stainless steel housing, plastic paddles, carbon steel chain. Approximate 18" wide x 48' overall length. Driven by a 7.5hp motor with reducer. Serial# 16-086-299260-19-1.

Hammermill Loop System Consisting Of: (2) Schutte-Buffalo-Astec Hammermills, Model AHM-20 Carbon Steel. Each mill has approximate (2) 48" diameter x 24" wide rotors. Top feed with hopper, bottom discharge. Each mill driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Each mounted on a frame. Includes (2) Twin City blowers, Type RBR-SW, size 926, each driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. (1) Top mounted dry distribution dual screw feeder. Designed to split flow of material to each hammermill, or reverse a screw to send all material to one side and (2) exhauster cyclones.

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16-087-299328-19-1. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16-087-299328-19-1.

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16-087-299328-19-1. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16-087-299328-19-1.

Astec Wood Fuel Conditioner, Carbon Steel. Approximate 12' diameter x 12' straight side. Side access door, (3) off center bottom outlets with (1) discharge screw conveyor. Top mounted agitator with a 50hp motor.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 16" diameter x 24' long with motor and reducer.

Smoot Blower System Consisting Of: (1) Roots positive displacement blower, model 56U-RAI, serial# 1603930592, driven by a 20hp motor. Includes silencer. Mounted on a frame, Smoot serial# 71785-001.

Hot Oil Pump Skid Consisting Of: (3) Blackmer System One Centrifugal Pumps, Model FRM, 316 Stainless Steel. Size 8 X 10-13, approximate 4200 gallons per minute at 110' head at 275 psi at 100 degrees F. Each driven by a 100hp motor, serial# 1108453FM, 1108450FM, 1108451FM. (3) Strainers with miscellaneous piping and valves. (1) Xylem 2 pass carbon steel shell & tube heat exchanger. Shell rated 125 psi at 1600 degrees F., tubes 150 psi at 1375 degrees F. Serial# 284050-01-1, National Board# 314909, built 2018. (1) Skid with a pump, heat exchanger and tank. (1) Expansion tank and a panel.

Astec Gas Burner, Model PB-65U-B-G-0-SF-FD-BB. Rated 65 MMBTU/HR. Job# 006744-015-206. Includes (1) combustion chamber, (1) Lapco ash collector, and (1) Twin City blower, size 270, type RTF-SW. Driven by a 75hp motor, serial# 007599-16-087.

Heatec Convectec Hot Oil Heater, Job# HI15-113-551. Includes a control panel, expansion tank and (1) Twin City blower, driven by a 15hp motor.

Stainless Steel Cyclone, Approximate 7' diameter x 40' tall. Includes a bottom rotary valve and (1) Twin City blower, driven by a 200hp motor.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 16" diameter x 24' long with motor and reducer.

Astec Hot Baghouse, Model BH-68-12-PP, Carbon Steel. Top bolt on bag section housing, coned bottom discharge section with discharge conveyor, serial# 16-087-299328-6-1. Includes a 250hp blower.

Astec Hot Baghouse, Model BH-68-16-PP-S, Carbon Steel. Top bolt on bag section housing, coned bottom discharge section with discharge conveyor. Includes a 250hp blower.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 19' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 21'6" long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 13' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 16' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 16' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 21'6" long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 12" diameter x 24' long with motor and reducer.

Astec Rotary Tube Type Indirect Dryer, Model WPD-10829, Carbon Steel. Last used with wood chips removed 5% - 6% moisture from feed material. End feed with hopper and screw feeder, end discharge with hood and a stainless steel auger discharge. Dryer driven by a chain & sprocket with a 60hp motor with a reducer, ratio 43.78 to 1. Includes a control panel with a Siemens Milltronics BW500/L controller. Serial# 16-088-299377-4-1.

Astec Rotary Hot Oil Tube Type Indirect Dryer, Model TD-1060, Carbon Steel. Last used drying wood from 45% to 10% moisture content. End feed with hopper and screw feeder, end discharge with hood and hot oil inlet & outlet manifold. Dryer driven by a chain & sprocket with a75hp motor with a reducer, ratio 64.42 to 1. Includes a control panel with a Siemens PLC controller, thrust idler hydraulic pump panel.

Continental Enclosed Tube Inclined Screw Conveyor, Carbon Steel. Approximate 24" diameter x 28' long with motor and reducer.

Astec Chip Drag Conveyor, Model BTD Drag. 304 Stainless steel housing, plastic paddles, carbon steel chain. Approximate 18" wide x 48' overall length. Driven by a 7.5hp motor with reducer.

Hammermill Loop System Consisting Of: (2) Schutte-Buffalo-Astec Hammermills, Model AHM-20 Carbon Steel. Each mill has approximate (2) 48" diameter x 24" wide rotors. Top feed with hopper, bottom discharge. Each mill driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Each mounted on a frame. Includes (2) Twin City blowers, Type RBR-SW, size 926, each driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. (1) Top mounted dry distribution dual screw feeder. Designed to split flow of material to each hammermill, or reverse a screw to send all material to one side and (2) exhauster cyclones.

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16088HM2. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16088HM2.

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16088HM1. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200hp, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16088HM1.

Astec Wood Fuel Conditioner, Carbon Steel. Approximate 12' diameter x 12' straight side. Side access door, (3) off center bottom outlets with (1) discharge screw conveyor. Top mounted agitator with a 50hp motor.

Astec Enclosed Tube Screw Conveyor, Carbon Steel. Approximate 16" diameter x 24' long with motor and reducer.

Smoot Blower System Consisting Of: (1) Roots positive displacement blower, model 56U-RAI, serial# 1605933604, driven by a 20hp motor. Includes silencer. Mounted on a frame, Smoot serial# 72582-001.

Hot Oil Pump Skid Consisting Of: (3) Blackmer System One Centrifugal Pumps, Model FRM, 316 Stainless Steel. Size 8 X 10-13, approximate 4200 gallons per minute at 110' head at 275 psi at 100 degrees F. Each driven by a 100hp motor, serial# 1094377FM, 1094375FM, 1108449FM. (3) Strainers with miscellaneous piping and valves. (1) Xylem 2 pass carbon steel shell & tube heat exchanger. Shell rated 125 psi at 1600 degrees F., tubes 150 psi at 1375 degrees F. Serial# 284050-03-1, National Board# 315499, built 2019. (1) Skid with a pump, heat exchanger and tank. (1) Expansion tank and a panel.

Astec Gas Burner, Model PB-65U-B-G-0-SF-FD-BB. Rated 65 MMBTU/HR. Job# 006744-015-206. Includes (1) combustion chamber, (1) Lapco ash collector, and (1) Twin City blower, size 270, type RTF-SW. Driven by a 75hp motor, serial# 16088.