Equipment by Brand
» Northland Stainless
Phoenix Equipment has a large inventory of used, unused, and reconditioned equipment from Northland Stainless . Phoenix Equipment offers a wide selection of categories from Northland Stainless . If you can't find the exact Northland Stainless equipment you are looking for, contact us and we can help you find it.
Used 10 gallon Northland Stainless Reactor, 316L Stainless Steel Construction, bolt on removable dished top, dish bottom, rated 100 PSI and full vacuum, +350/-320 degrees F, jacketed for 100 PSI and full vacuum at +350/-320 degrees F, Model XDHDS-100L Lightnin Agitator Drive with mechanical seal and lubricator, 3 blade retreat curve agitator, 4 baffles, (3) 1", (1) 2" sight glass, top nozzles, 1.5" center bottom outlet with plug valve, Serial No. 895020-3, National Board No. 954, New 1990.
Used 100 Gallon (400 Liter) Northland Stainless Inc. Sanitary Reactor. Model FB-50. Shell Rated 50 PSI/Full Vacuum @ 300F. Jacket Rated 100/FV PSI @ 350 F. Baldor/Reliance SS 1/2 HP Mixer 330 rpm output w/ Baldor H2 Inverter Drive, Electro-Sensors Model TR400 Rate Meter. Serial #946157. National Board #1606.
Used 660 Gallon (2500L) Sanitary construction Stainless steel Northland Stainless reactor. Rated 50 PSI/Vacuum @ 350 Deg.F Internal. SS Jacket rated 167/FV PSI @ 350 Deg.F. Has Lightnin model VKS300, S/N: R9972300000502, 3 HP, 230/460 volt, 1740 rpm Explosion Proof (XP) mixer.
Used 45 gallon STAINLESS STEEL JACKETED REACTOR FV/55 PSI 170 liter. Made by Northland Stainless, Serial no. 946345, year 1994, National Board no. 1640. Shell rated for Full Vacuum and 55 psi @ 300 deg. F. 0.250 inch thick. Jacket rated for 70 psi @ 300 deg. F, 0.187 inch thick. 24 inch ID x 23 inch straight side with dished bottom and top. 30 inch outside diameter with insulation. Tri-clamp 1 inch bottom center outlet, 4 inch, (3) 1.5 inch, and (2) 1 inch top fittings. Has an 11 inch hinged with clamps top port with a 4 inch tri-clamp fitting. Side and bottom jacket fittings. Attached to a 26.5 x 34 x 6 inch tall frame on wheels. O/A height is 52 inch. Has mount for bottom mag drive agitator. Possibly 316 SS, need to test.