USED DENVER HOLO-FLITE PROCESSOR COOLER MDL D2424-6-GED USED: S/N-196234-001, BUILT IN 1994. 304L STAINLESS STEEL MATERIAL CONTACT PARTS. NAMEPLATE ID # 44X196042001. ASME CODE DESIGN AND STAMPED SECTION VIII DIVISION 1 CODE. 12" HIGH EXTENSION RISER ADDED TO PROCESSOR (304L) IN 1996. TOTAL HEAT TRANSFER AREA OF PROCESSOR SCREWS IS 614 SQUARE FEET. SCREWS: UNIT HAS TWO SCREWS THAT ARE NOMINAL 24 INCH DIAMETER EACH X 24 FEET LONG X 6 INCH PITCH. FLIGHT THICKNESS IS 5/16" THICK BOTH FRONT AND BACK OF FLIGHTS. TWIN PAD CONSTRUCTION. ASME DESIGN AND CODE STAMPED FOR 150 PSIG AT 650 deg FOR THE SCREWS. TROUGH: JACKETED AND CODE STAMPED FOR 75 PSIG AT 400 deg F. INTERIOR TO HAVE A 2B FINISH AND WELDS GROUND SMOOTH. INTERNAL SHELL OF TROUGH IS RATED FOR 3 PSIG PRESSURE AND 30" WATER VACUUM. DRIVE SYSTEM: 10 HP AC MOTOR 3/60/230/460, 215T FRAME. CHAIN DRIVEN TO GIVE AN INPUT SPEED TO THE SCREW OF 3.54 RPM. SM-CYCLO REDUCER HC3235/16 WITH 319:1 RATIO. REDUCER IS HC 3235/16 WITH 15.7 HP INPUT, 153,000 IN-LB TORQUE; 319:1.0 RATIO; 5.49 RPM OUTPUT ON DRIVE. DRIVE SPROCKET IS SPH-6, #160 CHAIN, 29 TOOTH. DRIVEN SPROCKET IS # 160 CHAIN, 45 TOOTH. WEIGHT EMPTY OF THE PROCESSOR WITHOUT THE DRIVE IS 22,600 POUNDS. UNIT WAS RETROFITTED WITH A 12" VAPOR RISER SECTION WITH VIEWING WINDOWS IN 11-96. CONSTRUCTIED OF 304L STAINLESS STEEL. UNIT WAS ORIGINALLY DESIGNED TO COOL SUPER ABSORBENT POLYMER AT A RATE OF 9853 POUNDS PER HOUR WITH A SPECIFIC HEAT OF 0.4 BTU/LB AT 36 LB/CUBIC FOOT FROM 280 deg F (MAX 305 deg F) TO 149 deg F. USING WATER AS THE COOLING MEDIAUM. PLEASE NOTE WE HAVE TWO OF THESE UNITS. PRICE IS PER EACH UNIT WITH DRIVE. DRAWINGS AND MANUALS ARE ON FILE.